Description
| NOZZLE SIZE | PLATE THICKNESS (mm) |
|---|---|
| P8(1/32″) | 6 |
| P12(3/64″) | 12 |
| P16(1/16″) | 25,50,75 |
| P20(5/64″) | 100 |
| P24(3/32″) | 150 |
| P28(7/64″) | 200 |
| P32(1/8″) | 250 |
P-Type (LPG) Nozzle For Cutogen 5
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
Related products
-
SAFFIRE 2HP Welding Blowpipe for medium duty Welding application
Conform To: IS 7653-1975 & BSEN ISO 5172-1997
An ideal blowpipe for welding various metals in general workshop use and general heating purpose. It is supplied with tips suitable for welding mild steel in the range of 1.25 mm. to 8.5mm thickness.
The blowpipe is supplied complete with hose connections, spanner, operating data card, and 6 nos. swaged tips-sizes : 2, 3, 6, 13, 20 and 30.
-
FT Flashback Arrestor
The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FT model is designed to be connected to the torch, this model is equipped with a large cylindrical flame arresting element, and an automatic reset non-return valve.
Safety elements
- Gas non-return Valve: NV
- Flame Arrestor: FA
Safety device according to EN730-1,ISO5175,AS4603
Certification: BAM
-
PROTEX FLASHBACK ARRESTORS
The ESAB Flashback Arrestor is a multi-functional for connecting to a pressure regulator or an outlet point. Models suitable for oxygen, acetylene, propane are available as standard. In the event of a flashback the mechanism automatically cuts off the incoming gas thereby rendering the whole system safe. Simply push the POP up button to reset.
-
Heavy Duty Low Power Consumption Welding Power Sources for MIG / MAG Welding
- Heavy-duty Low Power Consumption welding power sources for high quality manual or mechanized MIG/MAG welding output.
- Hex phase rectification gives almost ripple free welding output free from spatter.
- Stick-out control eliminates demand for operator’s skill.
- Fresh Tip Treatment (FTT) control eliminates formation of globules at the wire tip during weld stop condition.
- Fresh Arc Start (FAS) control instantaneously enhances the arc-striking rate for better arc striking.
- Self hold circuitry with crater control module.
- Pre-flow of shielding gas with burn-back control for optimum utilizations.
- An ideal choice for MIG/MAG welding application with enhanced productivity and quality.
Reviews
There are no reviews yet.