Description
| NOZZLE (Inch) | PLATE THICKNESS (mm) |
|---|---|
| 1/32 | 6 |
| 3/64 | 12 |
| 1/16 | 25,50,75 |
| 5/64 | 100 |
| 3/32 | 150 |
| 1/8 | 250 |
PNM (LPG) Nozzle for NM 250/ NM400
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
Related products
-
P-Type (LPG) Nozzle For Cutogen 5
Hard drawn Tellurium copper used in one-piece nozzles
- withstands heat & wear
- out lasts any copper nozzles
One piece nozzle has swaged interior
- Gas passages are mirror smooth with internal angles rounded
- Non-turbulent more efficient gas flow.
- Clean smooth cuts with minimal kerf loss
Preheat ports are closely spaced around cutting orifice
- For greater concentration of preheat flames.
Long parallel preheat passages
- Permit redressing of the nozzle without affecting performance
-
NM 250 CUTTING BLOWPIPE
NM 250 is a well-balanced Nozzle Mix hand cutting Torch. The Torch gives more Safety and Efficiency than Injector Mix. Light weight NM cutters are easy to handle and can withstand rough usage for long time. The Torch is suitable with Oxy/Acetylene or Oxy/LP Gas and cutting capacity up to 300 mm.
-
ARC 630I
Arc630i is heavy duty IGBT based inverter power source suitable for MMA welding, AirCarbonArcGouging(A-CAG), Scratch TIG and designed for 24×7 usage.
-
Flashback Arrestors Model FRT
For connecting to a pressure regulator or an outlet point.
The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FRT model is designed to be connected to the regulator or outlet point. The model is equipped with a large cylindrical flame arresting element, an automatic reset non-return valve and a heat sensitive thermal cut-off.
Reviews
There are no reviews yet.