Conform To: IS 7653-1975 & BSEN ISO 5172-1997
ESAB Model “O” blowpipe is a finely balanced injector type blowpipe ideally suited for fine welding and brazing applications, including fusion welding and brazing applications. lt is used for fusion welding of the thin sheet up to 1.5 mm. (e.g. Zinc or Aluminium). It is also suitable for delicate lead welding. Careful design of tips neck and injector give trouble-free operation, high performance, economy, and safety. Model “O’ welding blowpipe is ideal for production lines where Its handiness minimizes operator fatigue. Model “O” blowpipe is available in different lengths for different types of operations.
| Capacity | Thin Sheet metal upto 1.5mm |
|---|---|
| Inlet | Oxygen 1/4″ B.S.P.RH & Acetylene 1/4″ B.S.P.LH |
| Weight | 250 gms |
| Length | 20 cm(Without tip) |
| Hose | 5mm bore hose (Blue-Oxygen & Red-Acetylene) |
Design/Construction
For connecting to a pressure regulator or an outlet point.
The ESAB cylindrical flashback arrestors are of advanced design giving a higher flow rate. The FRT model is designed to be connected to the regulator or outlet point. The model is equipped with a large cylindrical flame arresting element, an automatic reset non-return valve and a heat sensitive thermal cut-off.
NM 250 is a well-balanced Nozzle Mix hand cutting Torch. The Torch gives more Safety and Efficiency than Injector Mix. Light weight NM cutters are easy to handle and can withstand rough usage for long time. The Torch is suitable with Oxy/Acetylene or Oxy/LP Gas and cutting capacity up to 300 mm.
This is a single-stage flowmeter regulator, which provides precise regulation and measurement of gas flow. This is well suited for a wide variety of industrial uses.
Conform To : IS 7653-1975 & BSEN ISO 5172-1997
An Injector type Oxy-Acetylene, ESAB H.D. Heating Blowpipe, is used for localized heating. It is particularly useful for large construction sites, pipe bending, and other applications for general purpose heating. The standard blowpipe is about 750mm long and supplied with nozzle size 30. A large nozzle size 33 can be supplied as an optional extra. The blowpipe is designed to be used with Oxygen and dissolved Acetylene, preferably drawn from suitable manifold cylinders.
Select at least 2 products
to compare
Reviews
There are no reviews yet.