Conform To: IS 7653-1975 & BSEN ISO 5172-1997
ESAB Model “O” blowpipe is a finely balanced injector type blowpipe ideally suited for fine welding and brazing applications, including fusion welding and brazing applications. lt is used for fusion welding of the thin sheet up to 1.5 mm. (e.g. Zinc or Aluminium). It is also suitable for delicate lead welding. Careful design of tips neck and injector give trouble-free operation, high performance, economy, and safety. Model “O’ welding blowpipe is ideal for production lines where Its handiness minimizes operator fatigue. Model “O” blowpipe is available in different lengths for different types of operations.
| Capacity | Thin Sheet metal upto 1.5mm |
|---|---|
| Inlet | Oxygen 1/4″ B.S.P.RH & Acetylene 1/4″ B.S.P.LH |
| Weight | 250 gms |
| Length | 20 cm(Without tip) |
| Hose | 5mm bore hose (Blue-Oxygen & Red-Acetylene) |
Design/Construction
Hard drawn Tellurium copper used in one-piece nozzles
One piece nozzle has swaged interior
Preheat ports are closely spaced around cutting orifice
Long parallel preheat passages
Conform To : IS 7653-1975 & BSEN ISO 5172-1997
An Injector type Oxy-Acetylene, ESAB H.D. Heating Blowpipe, is used for localized heating. It is particularly useful for large construction sites, pipe bending, and other applications for general purpose heating. The standard blowpipe is about 750mm long and supplied with nozzle size 30. A large nozzle size 33 can be supplied as an optional extra. The blowpipe is designed to be used with Oxygen and dissolved Acetylene, preferably drawn from suitable manifold cylinders.
Conform To : IS 7653-1975 & BSEN ISO 5172-1997
ESAB Saffire Light Weight Welding Blowpipe has been developed for use in light sheet metal in garages and workshops. It is ideally suitable for repetitive work in production lines, where its handiness minimizes operator fatigue. Careful design of tips, mixer and shank gives trouble-free operation, high performance, economy and safety. The blowpipe is supplied with complete hose connection, operating data card and 4 nos. of swaged tips in sizes : 2, 3, 6 and 13.
Hard drawn Tellurium copper used in one-piece nozzles
One piece nozzle has swaged interior
Preheat ports are closely spaced around cutting orifice
Long parallel preheat passages
Select at least 2 products
to compare
Reviews
There are no reviews yet.